Fibertec’s 400 Series fiberglass slider window is ideal for retrofit and new construction applications. This window features two sashes that operate horizontal allowing air circulation through the right and left, thus providing maximum ventilation and tilt-out access for easy window cleaning and maintenance.
Looking for inspiration and design ideas? See our gallery for fiberglass sliding window images
STANARD SERIES: 3/4″ Pultrude Fiberglass Frame completely filled with laser die cut Polystyrene, injection molded reinforced mitered corners with Polyurethane foam fill and sealed with Silicone Sealant.
SIZES AVAILABLE: Minimum width 24”, Minimum height 14”, Maximum width 84”, Maximum height 60”.
Also available in three lite sash design for larger width openings.
Fibertec manufactures to sizes specified +/- 1/8″ (3.17 mm) industry tolerance.
TEST RESULTS: Products have been independently tested and rated by NFRC.
GLAZING OPTIONS: Double glazing – 7/8” sealed units with 5/8” air space.
Triple glazing (option) – 7/8” sealed units with ¼” air space.
Various other optional glazing is available to suit any climate condition or esthetics.
PAINT FINISH: Stock Colors are White, Commercial Brown, Slate Grey, Black and Sandalwood (co-colors are also available).
All frames use an Acrythane water based with UV protector.
The paint is rated environmentally friendly due to low VOC.
Please Note: not all components are paintable.
ATTACHMENTS: Brickmold (with or without nail flange) three types jam extensions are available for installation applications.
WEATHER STRIPPING: Fin pile weatherstrip around sash perimeter to ensure constant contact with main frame.
HARDWARE: Surface mounted heavy duty metal cam locks available in the color white.
GLAZING METHOD: Marine glazed, using Santoprene wrap around glazing gasket to ensure a positive seal.
WINDOW DIAGRAM: All diagrams must be viewed from the exterior:
INSTALLATION: Shall be performed by experienced installers in accordance with manufacturer instructions and CSA A440.4 standards. Window shall be plumb and square after installation is complete and sealed to both interior and exterior wall with high quality sealant around the perimeter of the frame. If perimeter cavity is to be foamed, additional anchorage may be required to prevent bowing. It shall be the responsibility of the installers to make all necessary final adjustments to ensure normal and smooth operation.
MAINTENANCE: Occasional cleaning of glass and frame components with a non-abrasive detergent is recommended. Clean and lubricate hinge tracks as required.
