Fiberglass Awning Window Specifications
STANDARD SERIES SPECIFICATIONS: 3 1/4″ Pultruded Fiberglass closed back frame completely filled with laser die cut Polystyrene, injection molded reinforced mitered corners with Polyurethane foam fill, sealed with silicone sealant.
SIZES AVAILABLE: Minimum width 22″, Minimum height 18″, Maximum width 60″, Maximum height 48″. Fibertec manufactures to sizes specified + / – 1/8″ (3.17 mm) industry tolerance.
TEST RESULTS/ENERGY RATINGS: Products have been independently tested and rated in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-11,NAFS – North American Fenestration Standard/Specification for windows, doors, skylights and A440S1-17. AAMA/WDMA/CSA 101/I.S.2/A440-17,NAFS and A440S1-19.AAMA/WDMA/CSA 101/I.S.2/A440-122, NAFS 2022 (Click here for Performance Testing & Energy Ratings).
GLAZING OPTIONS: Double glazing – 7/8” sealed units with 5/8” air space.
Triple glazing (option) – 1 5/16” sealed units (maximum operator width 36”).
Various other optional glazing is available, to suit any climate condition or esthetics. (LowE, Argon Gas and Super Spacer) (See here for all glass and glazing options)
PAINT FINISH: Stock Colors are White, Commercial Brown, Slate Grey, Black and Sandalwood (co-colors are also available).
All frames use an Acrythane water based paint with UV protector.
The paint is rated environmentally friendly due to low VOC. Custom colors are available.
Please Note: The paint finish does not wrap around to the bottom edge of the frame when using nail fin application. Please refer to the cross section drawing for nail fin under attachment options. (See all interior and exterior colour options)
ATTACHMENTS TO FRAME: Brickmould (with or without nailing flange) three types; jamb extensions, strap anchors, and nailing fin are available for installation applications. (Click here to see attachment options)
WEATHER STRIPPING: The three seal design conforms to the rain screen principle. A combination of flexible Santoprene bubble and saddle gasket on the main frame, along with pile fin on the sash. The weather-stripping is replaceable.
HARDWARE: Truth Encore TM dual arm roto-gear mechanism. Available in white and black. (See here for hardware information)
INSECT SCREEN: Roll Formed aluminum screen bar with hidden spring loaded corner key, screened with anti-rot fiberglass mesh.
GLAZING METHOD: The glass is held in place by a removable exterior glass stop. Double-sided closed cell foam tape on the interior and a Santoprene rubber gasket on the exterior assist in securing the glass. The glazing cavity is edge drained to the exterior with concealed drainage holes. The glazing cavity is also edge vented to the exterior through concealed vent holes.
INSTALLATION: Shall be performed by experienced installers in accordance with manufacturer instructions and CSA A440.4 standards. Window shall be plumb and square after installation is complete and sealed to both interior and exterior wall with high quality sealant around the perimeter of the frame. If perimeter cavity is to be foamed, additional anchorage may be required to prevent bowing. It shall be the responsibility of the installers to make all necessary final adjustments to ensure normal and smooth operation.
MAINTENANCE: Occasional cleaning of glass and frame components with a non-abrasive detergent is recommended.
