STANDARD SERIES SPECIFICATIONS: 5 ¾” Pultruded Fiberglass Closed Back Frame filled with laser die cut Polystyrene and blocking, injection molded reinforced corners and filled with Polyurethane foam fill and sealed with silicone sealant.
SIZES AVAILABLE: The 750 Series sliding patio door is available in 2, 3 or 4 panel settings. Minimum nominal size 60″ x 80″
Maximum nominal size 189″ x 96″
Custom sizes are also available. Fiberglass doors are available in two, three (end operator only), and four panel (center operators). Fibertec manufactures to sizes specified +/- 1/8″ )3.17mm) industry tolerance.
TEST RESULTS/ENERGY RATINGS: Products have been independently tested and rated by CSA A440, AAMA, and NFRC . (Click to see energy ratings)
GLAZING OPTIONS:Tempered in and out Double Glazing – 3/4″ sealed units with 1/2″ air space.
Tempered Triple glazing (optional) -1 5/16″ sealed units (maximum operator width 32″). Middle glass unit is annealed.
Various other glazing options are available to suit any climate condition. (See glass and glazing page for more information)
PAINT FINISH:Stock exterior colours are white, sandalwood, commercial brown and black. All standard frames come with a white interior or can be painted to any requested colour. Stock exterior colours are white, sandalwood, commercial brown and black. All standard frames come with a white interior or can be painted to any requested colour. Other standard interior colour options include sandalwood, commercial brown and black. All frames use an Acrythane water based paint with UV protector. The paint is rated environmentally friendly due to low VOC. Custom colours are available.
Note that the paint finish does not wrap around to the bottom edge of the frame when using nail fin application. Please refer to the cross section drawing for nail fin under attachment options. (See here for interior and exterior colour options)
HARDWARE:Attractive metal handle on operating panel in white or black, is available with an optional key lock. Also available as an upgrade, # 9700 EURO Handle in Brushed Chrome. As well, optional foot lock allows operating panel to be locked in shut or slightly opened position.
SLIDING INSECT SCREEN:Extruded aluminum frame with fiberglass mesh, equipped with spring loaded rollers at the top and bottom to ensure ease of operation and accurate fitting. Thumb lock is a standard feature as well.
INSTALLATION:Shall be performed by experienced installers in accordance with manufacturer instructions and CSA A440.4 standards. Window shall be plumb and square after installation is complete and sealed to both interior and exterior wall with high quality sealant around the perimeter of the frame. If perimeter cavity is to be foamed, additional anchorage may be required to prevent bowing. It shall be the responsibility of the installers to make all necessary final adjustments to ensure normal and smooth operation.
MAINTENANCE:Occasional cleaning of glass and frame components with a non-abrasive detergent is recommended. Clean and lubricate hinge tracks as required.