PREMIUM SERIES SPECIFICATIONS
3 1/4” Pultruded Fiberglass Frame with closed back frame, composite block reinforced butt joint corner inserts with foam (jamb to sill) gasket and sealed with silicone sealant. Sash has co-pultruded lift rail on top and bottom sash for pleasing esthetic look.Center meeting rail has co-pultruded interlock and in compliance with AAMA 1011.S2 and CAN/CSA-A440.0 and CSA A440.2 (AAMA 101-93) standards.
Stock colours are White interior and exterior, White interior and Commercial Brown exterior, White interior and Sandalwood exterior. All frames use Sequoia TM Series V advanced acrylic polyurethane (water borne) baked on the finish. The paint is rated environmentally friendly due to low VOC. Custom colours are available. Please not that not all components are paintable.
Exterior glass stop with co-extruded gasket, ensures a positive seal to the sealed unit glass.
Double glazing – 3/4” sealed units with 1/2” air space.
Triple glazing (optional) – Various other optional glazings are available, to suit any climate condition or esthetics.
Marine glazed `wrap around` sash using rubber glazing gasket.
Jamb extensions, Strap Anchors, PVC nailing fin, are available for installation applications.
Minimum width 18”, Minimum height 30”, Maximum width 54”, Maximum height 84” (widths over 48”, maximum height not to exceed 66”). Fibertec manufactures to sizes specified + / – 1/8” (3.17 mm) industry tolerance.
Shall be performed by experienced installers in accordance with manufacturer instructions and CSA A440.4 standards. Window shall be plumb and square after installation is complete and sealed to both interior and exterior wall with high quality sealant around the perimeter of the frame. If perimeter cavity is to be foamed, additional anchorage may be required to prevent bowing. It shall be the responsibility of the installers to make all necessary final adjustments to ensure normal and smooth operation.
Occasional cleaning of glass and frame components with a non-abrasive detergent is recommended.
Products have been independently tested and rated by AAMA, and NFRC (see energy ratings).