STANDARD SERIES SPECIFICATIONS
5 ¾” Pultruded Fiberglass Closed Back Frame filled with laser die cut Polystyrene and blocking, injection molded reinforced corners and filled with Polyurethane foam fill and sealed with silicone sealant.
PORTRAIT SERIES SPECIFICATIONS
Pultruded Fiberglass Frame and Sash laminated with real stainable oak veneer.
Minimum nominal size 60” x 80”
Maximum nominal size 189” x 96”
Custom sizes are also available. Fiberglass doors are available in two, three (end operator only), and four panel (center operators). Fibertec manufactures to sizes specified +/- 1/8" )3.17mm) industry tolerance.
Double glazing- 1” sealed units with 11/16” air space.
Triple glazing -1 1/4″ sealed with 3/8" air space.
Various optional glazing is available to suit any climate condition or aesthetic requests. (LowE, Argon Gas and Super Spacer)
Standard White finish using Sequoia™ series V advanced acrylic polyurethane (water borne) Rated environmentally friendly due to low VOC. (Note: sandalwood sill at all times).
Operating panel is equipped with two sets of adjustable ball bearing tandem rollers.
Extruded aluminum frame with fiberglass mesh, equipped with spring loaded rollers at the top and bottom to ensure ease of operation and accurate fitting. Thumb lock is a standard feature as well.
Attractive metal handle on operating panel in white or black, is available with an optional key lock. Also available as an upgrade, # 9700 EURO Handle in Brushed Chrome. As well, optional foot lock allows operating panel to be locked in shut or slightly opened position.